Garage Storage Cabinets by GSC - Distributors Wanted! DIY or Professional Installation

Products

System Examples

Retail Price List

Become A Dealer

Locate A Dealer

Download Literature

Thank you for purchasing Garage Storage Cabinets! Read through the instructions before beginning the installation process. Contact your local GSC™ dealer if you have questions about your installation. We hope you enjoy your new GSC™ Cabinet system.

Download these instructions to print or read offline



			Using a stud finder locate and mark the studs between the upper cabinets and the workbench. Put the 3" tech screws in the rail for the above cabinets can also be used as a location indicator.
			Center the pegboard between the upper cabinets and the workbench from left to right, top to bottom.
			Use 3" deck screws to secure the pegboard to the marked studs. Run the screws through the pegboard next to the frame. Be sure to catch the 1" support rail on the back side of the pegboard panel.		When putting the pegboard on the end of a run of cabinets, run the screws into all 4 corners of the pegboard.
	Continue to 7. Corner Cabinets



	Stud Finder 5/16” Hex Bit Standard Screw Bit Set Standard Drill Bit Set Chalk Line Brad Gun 1-3/16” Brads 4’ Level 14V Cordless Drill or Equivalent Small Portable Air Compressor 2” Rubber Mallet Wood Glue Phillips Screw Driver Jig Saw Additional Hand Tools Sharpie Pen

©2004 Garage Storage Cabinets, L.L.C. All Rights Reserved.

Prospective Dealers